Buy Thick Carbon Fiber Sheets and Panels | 2mm, 3mm, 3.4mm

3.1mm High Temp Carbon Fiber

protechcomp — Thu, 01 Apr 2021 16:18:45 +0000

If you’ve got an application that requires a material that can withstand heat, our high temp panel may be your answer. This carbon fiber panel is infused with a high temp resin that will take temperatures up to 400 degrees. At .125” or 1/8” thick, this is a thick structural sheet in a semi-gloss finish. It’s extremely rigid and rock solid.

Made from 6K 2×2 twill weave carbon fiber fabric, this product is 100% genuine carbon fiber. It has a semi-gloss finish on one side and a textured matte finish on the other. This sheet can be cut with standard dremel tools, but we recommend carbide, bimetal or diamond coated cutting tools available at your hardware store.

This material is also available in custom sizes and thicknesses. Contact us for pricing.

The post 3.1mm High Temp Carbon Fiber appeared first on Protech Composites.

3.1mm Semi-Gloss Finish Carbon Fiber Sheet

protechcomp — Wed, 31 Mar 2021 20:23:07 +0000

At .122” or 1/8” thick, the 3.1mm is our thickest structural sheet with a semi-gloss finish on one side and a textured matte finish on the back. This panel is extremely rigid and rock solid.

Made from 6K 2×2 twill weave carbon fiber fabric, this material is 100% genuine carbon fiber. It can be cut with standard dremel tools, but we recommend carbide, bimetal or diamond coated cutting tools available at your hardware store.

The post 3.1mm Semi-Gloss Finish Carbon Fiber Sheet appeared first on Protech Composites.

2.4mm Matte Finish Carbon Fiber Sheet

protechcomp — Wed, 31 Mar 2021 20:22:44 +0000

At .093” or 1/10” thick, the 2.4mm is a rigid structural sheet with a textured matte finish. This carbon fiber panel doesn’t need a backing to support gauges and controls mounted to it.

Made from 6K 2×2 twill weave carbon fiber fabric, this product is 100% genuine carbon fiber. It has a textured matte finish on both sides, allowing it to bond to any surface using our 3M high-performance double-sided adhesive. This sheet can be cut with standard dremel tools, although steel tools will wear down after a few panels. We recommend carbide, bimetal or diamond coated cutting tools available at your hardware store.

The post 2.4mm Matte Finish Carbon Fiber Sheet appeared first on Protech Composites.

1.7mm Matte Finish Carbon Fiber Sheet

protechcomp — Wed, 31 Mar 2021 20:22:16 +0000

At .068” or 1/16” thick, the 1.7mm is a structural sheet with a textured matte finish. A very stiff sheet, this carbon fiber panel doesn’t need a backing to support gauges and controls mounted to it.

Made from 6K 2×2 twill weave carbon fiber fabric, this material is 100% genuine carbon fiber. It has a textured matte finish on both sides, allowing it to bond to any surface using our 3M high-performance double-sided adhesive. This sheet can be cut with standard dremel tools, although steel tools will wear down after a few panels. We recommend carbide, bimetal or diamond coated cutting tools available at your hardware store.

The post 1.7mm Matte Finish Carbon Fiber Sheet appeared first on Protech Composites.